Important safety instructions – Memorex Digital Video Disc Player User Manual

Page 2

Advertising
background image

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR

This Caution Marking is located at the rear enclosure of the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to alert

the user to the presence of uninsulated

dangerous voltage within the product’s

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A

LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT,

PLEASE READ THIS OWNER’S MANUAL CAREFULLY

AND RETAIN FOR FUTURE REFERENCE. SHOULD

THE UNIT REQUIRE MAINTENANCE, CONTACT AN

AUTHORIZED SERVICE LOCATION-SEE SERVICE

PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM,

DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE

LASER RADIATION MAY BE PRESENT WHEN THE

ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, AND ANNOYING INTERFERENCE, USE THE

RECOMMENDED ACCESSORIES ONLY.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC

connection. Lightning and power surges ARE NOT

covered under warranty for this product.

The symbol for class II

(Double Insulation)

LASER WARNING:

This unit employs a laser. Only qualified service

personnel should attempt to service this device due to

possible eye injury.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for

help.

FCC CAUTION:

To assure continued compliance, follow the attached installation

instructions and use only shielded cables when connecting to other

devices. Also, any changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks of

Dolby Laboratories.

Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;

6,487,535 & other U.S. and worldwide patents issued &

pending. DTS is a registered trademark and the DTS logos,

Symbol, DTS-HD, DTS-HD High Resolution Audio and DTS-

HD High Res Audio are trademarks of DTS, Inc. © 1996-2008

DTS, Inc. All Rights Reserved.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA

LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU

FOND.

Advertising