Miele Laboratory Glassware Washer G 7883 - Manual (Page 34)

For future servicing, be sure to document any changes made to the factory
settings in the fields provided.
General information:
– Program selector positions that have no assigned function are represented by a
bar (
- ) in the middle of the display.
– To call up the programming level, use the
f position.
The status
E.. will appear in the display.
The following instructions apply to all programming functions:
To access the programming mode
^ Turn the program selector to f.
^ Turn off the machine.
^ Simultaneously press and hold the
"Display"
ß and "Start" 6 buttons,
while turning on the machine by
pressing the On/Off button.
The current program status
P..
appears in the display. The Fill/Drain
indicator lights.
Saving to memory and exiting the programming mode
^ Press the "Start" 6 button. SP appears in the display.
^ Press the "Start" 6 button again.
The change will now be stored in the
memory.
Exiting the programming mode without saving
^ Press the On/Off button to turn off
the machine.
The change is canceled.
Programming functions
34