Headphones, Headphone operation – Magnadyne MV6000 User Manual

Page 13

Advertising
background image

The correct operation, care and maintenance of
the headphones is critical to their ability to provide
the user with a lifetime of operation. Misuse,
abuse and neglect of the headphones will result in
poor performance and premature failure.

WARNING!

Do not throw the headphones.
Do not get the headphones wet or submerse

them in any liquid.

Do not lay heavy objects on the headphones.
• Refrain from turning the volume of the head-

phones to the maximum position, this may
result in ear damage.

Adjust the Headphones to Fit Your Head

A. Spread the ear pads apart and place the

headphones on your head. Observe the “L”
and “R” indicators.

B. Slide the adjuster up or down until a comfort-

able fit is achieved.

Headphones

13

1. Turn On the Headphones:

To turn on the headphones, press the “PWR”
button on the right side. The digital display will
show radio station frequency when the head-
phone is on.

4. Turn Off the Headphones When Not in Use:

A. Press the “PWR” button to turn off the

headphones. The display will be blank
when the headphones are off.

B. The batteries will last for approximately 10

hours of continuous use. Forgetting to turn
off the headphones when they are not in
use will decrease the battery life.

5. Connecting a Second Set of Headphones

The MovieVision headphones have a receptacle
located at the side of the “L” ear pad. A second set
of personal-type headphones (must be a 3.5 mini
male type plug) can be connected at this point.

Note: When a second pair of headphones are
attached, the tuning and audio level is con-
trolled by the MovieVision headphone.

2. Tuning an FM Radio Station:

A. Press the “UP” or “DOWN” button to man-

ually tune in an FM radio station.

B. Press and hold the “UP” or “DOWN” button

for one second then release. The radio tuner
will search up or down the radio band for the
next strongest FM radio station.
Note: FM radio stations are always received in
Stereo Mode.

C. Adjust the volume knob to the desired volume

level.

3. Listening to What is Displayed on the Screen:

On the right ear pad are 3 preprogrammed but-
tons marked 1, 2 and 3. These buttons will tune
the headphone radio to the exact MovieVision
signals. Press the buttons one at a time until
what you hear in the headphones is what is dis-
played on the viewing screen.

Headphone Operation

Volume
Knob

MV6000-UM.qxp 4/5/05 16:14 Page 13

Advertising
This manual is related to the following products: