Magnadyne MV6000 - Manual (Page 5)

5
Screen and DVD/CD Functions
1. PWR / STOP Button ( ): Press this but-
ton to turn the unit On/Off. Press to stop disc
play.
2. MODE Button ( ): Press this button to change
the play source between DVD/CD player and
an auxiliary input source.
3. PLAY/PAU Button ( ): Press this button to
display on screen monitor controls.
4. PREV Button ( ): Press this button during
playback to skip back to the previous track.
5. NEXT Button ( ): Press this button during
playback to skip forward to the next track.
6. EJECT Button ( ): Press this button to eject
the disc.
7. Infrared Remote Sensor: This is the sensor for
the infrared remote.
8. Disc Slot: To play a DVD/CD, insert a disc into
slot with label facing up.
9. Transmitter Frequency Selection: 3 position
frequency switch to select a different frequen-
cy. It transmits a signal that is received by
the MovieVision headphones. The signal can
also be received by the vehicle’s car radio.
10. Mono/Stereo Switch: Changes the unit from
Mono to Stereo
11. Dome Light: The dome lights located in the
MovieVision screen housing will illuminate
whenever the vehicle doors are open.
12. Dome Light Switch: To activate the dome
lights while the vehicle is in motion, press
the dome light switch.
13. Viewing Screen Release: To release the
screen, push inward on the tab and pull
downward. Place the screen to the desired
viewing position. To lock the viewing screen
in the closed position, press upward on the
edge of the screen housing until the screen
locks into place (you will hear a snap sound).
90.1MHz 90.5MHZ
1
2
3
6
7
8
12
9
13
4
11
5
10
MV6000-UM.qxp 4/5/05 16:13 Page 5