Meyer Sound UltraCompact High-Power Curvilinear Array Loudspeaker M'elodie - Manual (Page 7)

1
INTRODUCTION
These operating instructions provide important information
about the form, features, function, and specifications of
the M’elodie
TM ultracompact high-power curvilinear array
loudspeaker. In addition to power requirements and audio
characteristics, the book also covers fundamental line
array design, useful software tools, and rigging options for
M’elodie.
Chapter 1: Introducing M’elodie provides a general
description of M’elodie and its capabilities and functionality.
Chapter 2: Power Requirements discusses power
distribution, and voltage and current requirements, as well
as electrical safety issues.
Chapter 3: Amplification and Audio will help you
understand and harness the power of the M’elodie amplifier.
Amplifier specifications, connectivity, limiting, and cooling
system components are all covered.
Chapter 4: RMS™ Remote Monitoring System introduces
the RMS communication module, which is installed in the
M’elodie amplifier to make use of Meyer Sound’s RMS
remote monitoring system.
Chapter 5: Line Arrays and System Integration will walk
you through the integration of M’elodie in mid-high or full-
range line array systems.
Chapter 6: System Design and Integration Tools
introduces two comprehensive tools, Meyer Sound MAPP
Online Pro™ and SIM 3
® , that can assist you with the
acoustical and functional requirements of system design
and optimization.
Chapter 7: QuickFly ® Rigging shows the QuickFly rigging
components available for use with M’elodie, including the
MG-M’elodie top grid and MCF-M’elodie caster frame.
You'll get an overview on arraying M’elodie loudspeakers in
flown or ground-stacked configurations.
Appendix A: Optional Rain Hood discusses the procedure
for installing the optional M’elodie rain hood used in
weather-protected versions.
Appendix B: Optional VEAM Multipin Connector
includes information on the optional factory-installed VEAM
Connector.
Appendix C: Specifications and Dimensional Drawings
provides detailed acoustic and electrical specifications for
M’elodie, along with detailed dimensional drawings.
HOW TO USE THIS MANUAL
As you read this manual, you’ll find figures and diagrams
to help you understand and visualize what you’re reading.
You’ll also find icons that flag important information or warn
you against improper or potentially harmful activities. These
icons include:
A NOTE identifies an important piece of
information relating to the topic under
discussion.
A TIP offers a helpful tip relevant to the topic
at hand.
A CAUTION gives notice that an action can
have serious consequences and could cause
harm to equipment or personnel, delays, or other
problems.
Information and specifications are applicable as of the date
of this printing. Updates and supplementary information are
posted on the Meyer Sound website at:
http://www.meyersound.com
You may contact Meyer Sound Technical Support at:
Tel: +1 510 486.1166
Fax: +1 510 486.8356
E-mail: [email protected]
INTRODUCTION