Miele KWT4154UG1 - Manual (Page 20)

To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
Non-abrasive cleaning agents are
also unsuitable, as they can cause
matte areas to appear.
Do not allow water to get into the
electronic unit or lights.
Do not allow water to get into the
drainage channel or drain hole when
cleaning.
Do not use a steam cleaner to clean
this appliance. Pressurized steam
could penetrate electrical
components and cause a short
circuit.
Before cleaning
^ Unplug the power cord.
^ Remove any bottles from the
appliance and store it in a cool place.
^ Take out any removable parts,
e.g., shelves.
Cleaning the interior, door and
accessories
Use a mild solution of warm water and
liquid dish soap. All accessories and
shelves should be hand-washed only.
^ Clean the condensate channel and
drain hole frequently, allowing
condensate to drain unhindered. Use
a straw or similar item to clear the
drain if necessary.
^ After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance door open for a
short time, so the moisture can
evaporate.
^ Clean the appliance door with a
glass cleaner.
Ventilation slits
^ Check the ventilation slits regularly.
Remove any dirt/dust with a vacuum
cleaner or brush. Clean as needed.
Cleaning and care
20