Figure 9-35, Creating a profile -27 – Motorola 2.1 User Manual
Page 128
Advertising
Appendix A:
12. From a client card utility. Establish a profile as indicated below.
NOTE:
user must specify SSID manually. This is because a Duo device’s backdoor
access SSID is suppressed. The SSID is the MAC address of the device label in all
capital letters separated by colons.
Figure 9-35
Creating a Profile
13. You should now be connected to the backdoor VAP (Virtual Access Point). Verify by
attempting to ping the MOTOMESH Duo 2.1 device’s default IP.
9-27
Advertising