Enclosure side 1, Enclosure side 1 -2, Figure 3-1 – Motorola 2.1 User Manual
Page 49
Chapter 3: MOTOMESH Duo Hardware
Enclosure Side 1
Figure 3-1 details the following ports and connections:
• Device MAC Address (Ethernet MAC address)
• Power LED (This LED indicates device power only)
• 2.4 GHz Antenna Port (Female N-Type connector)
• Vent (Pressure)
• Select Port (When a personality plug is attached standard power over Ethernet
(802.3af PoE) or Canopy Connect (PoE) is sourced on the POE OPT Ethernet port
(See side 2).
If a personality plug is attached to the select port DC power will be supplied on pins 4, 5 and 7, 8 of the
PoE OPT Ethernet port.
[Do not attach a non capable PoE device to this port when using a
personality plug as the device could be damaged]
.
Figure 3-1
Enclosure Side 1
Power LED
Select Port
2.4 GHz Antenna Port
MAC Address
3-2