MGE UPS Systems 3000 - Manual (Page 20)

Page 20 - 3400723100/AD
Troubleshooting requiring MGE UPS SYSTEMS after-sales support
4. Maintenance
4.1 Trouble-shooting
Indication
LED 17 goes ON and
the buzzer sounds
continuously.
Signification
UPS electronics have detected a UPS fault.
◗ The connected equipment is no longer supplied.
The equipment connected to the UPS is no
longer protected.
Correction
Call the after-sales support
department.
Indication
LED 18 flashes and the
buzzer beeps once.
LED 17 flashes.
Signification
UPS overload. The power drawn by the connected
equipment exceeds UPS capacity.
A battery fault was detected during the automatic bat-
tery test.
Correction
Check the power drawn by the
equipment and disconnect any
non-priority devices.
Replace the battery module
(see section 4.2).
Troubleshooting not requiring MGE UPS SYSTEMS after-sales support (all versions)