Motorola HT1250 - Manual (Page 38)

36
English
SCA
N
Note: Even if there is activity on a non-priority
channel, your radio will automatically
switch to an active priority channel and
indicate the activity with a short tone.
Setting Priority Channels
Channel 2
(Priority 1) Ch2 ➠ Ch1 ➠ Ch2 ➠ Ch3 ➠
Ch2 ➠ Ch4 ➠ Ch2 ➠ …Ch1
Channel 2
(Priority 1) and
Channel 8
(Priority 2) Ch2 ➠ Ch1 ➠ Ch8 ➠ Ch3 ➠
Ch2 ➠ Ch4 ➠ Ch8 ➠ …Ch1
1 ) to enter Menu Mode.
2 + or ? until Program Lists
3 ) to select Program Lists
4 + or ? until Scan List
5 ) to select Scan List
Priority Channel Scanning Sequence 6 + or ? until Edit Priority?
7 ) to select Edit Priority?
8 + or ? until
or until
9 ) to select the desired priority level.
10 + or ? until you see the channel you
want to prioritize.
11 ) to prioritize that channel.
12 ( to return to Edit Priority?
– or–
Hold down ( to exit Menu Mode.
Notes: You cannot reprioritize a Priority 1
channel to Priority 2.
If you want to reprioritize all channels,
you must delete each priority channel
from the scan list and add it back.
Program Lists
Program Lists
Scan List
Scan List
Edit Priority?
Edit Priority?
Priority #1?
Priority #2?
Edit Priority?
Scan.fm Page 36 Monday, September 30, 2002 2:09 PM