Quick reference card, Ht1250 – Motorola HT1250 User Manual

Page 55

Advertising
background image

Sending a Call

1. Select appropriate zone.

2. Turn Channel Selector knob to desired channel.

3. Press PTT and speak clearly with mouth about 2.5 to 5 cm (1 to 2 inches)

away from microphone.

4. Release PTT to listen.

Receiving a Call

1. Turn radio on and set volume level.
2. Switch to desired channel.
3. When a call is received, it will be heard at the volume level you set.

Deleting a Nuisance Channel During Scanning

1. While on a nuisance channel, press and hold preprogrammed Scan button

until you hear a tone.

2. Release Scan button.

Making a Phone Call

1. Press Phone button, or select Phone from the menu.
2. Send access code, if required.
3. Send phone number in one of the following ways:

• Press and release PTT to send last dialed number.

or— (For full-keypad radios only)

• Press preprogrammed Speed Dial button, followed by a keypad key (1–9),

to access first nine numbers in your phone list. (Press PTT if buffered dial.)
or— (For full-keypad radios only)

• Enter phone number using the keypad. (Press PTT if buffered dial.)

4. Hold radio in vertical position with microphone about 2.5 to 5 cm (1 to 2

inches) away from your mouth. Press PTT to talk; release it to listen.

Ending a Phone Call

1. Send de-access code, if required.
2. Press preprogrammed Phone button, or press

(

.

Sending and Cancelling an Emergency Alert

Press preprogrammed Emergency button (Top button [D]) to activate
Emergency Alert.

Press and hold down Emergency button to cancel Emergency Alert.

HT1250

Quick Reference Card

Record the functions for your radio’s programmable buttons in the table
provided below. For further information, see pages 9 and 10 in this User Guide.

On/Off/Volume Knob

LCD Screen

Microphone

Keypad

Menu Keys

(programmable)

Side Button 1 (A)

Push-to-Talk (PTT)

LED Indicator

(programmable)

Side Button 2 (B)

(programmable)

Side Button 3 (C)

Channel Selector Knob

(programmable)

Top Button (D)

Button

(P1, P2, P3)

(programmable)

(optional)

Button

Function

Short Press Long Press

Hold Down

Page

NAPrefQR Card.fm Page 53 Monday, September 30, 2002 2:12 PM

Advertising