Motorola HT1250 - Manual (Page 39)

37
English
PH
ONE
PHONE
If your radio has access to a telephone system,
you can make a phone call. To do this, your
radio must send an access code to a station
that connects it to a phone line. (Ask your dealer
for more details.) After completing a call, your
radio must send a deaccess code to hang up.
Note: In order to receive a phone call, your
radio must have a DTMF decode board
installed. Ask your dealer for details.
MAKING A PHONE CALL D
You can make a phone call by using the
preprogrammed Phone button (see page 11)
or the menu.
D will appear on the LCD screen
when you are in Phone Mode.
To initiate a phone call:
Press the Phone Button.
– or–
Do the following:
1 ) to enter Menu Mode.
2 + or ? until Phone
3 ) to select Phone
4 You will hear a series of tones, indicating that
an access code is being sent automatically,
and see your access code;
– or–
(for full-keypad radios only) enter your access
code using the keypad.
5 When you hear a dial tone:
(For full-keypad radios only) enter the phone
number using the keypad.
– or–
+ or ? to select a number from the
phone list; then press the PTT button to send it.
– or–
(For full-keypad radios only)
a Press and release the preprogrammed
Speed Dial button (see page 11) to use
the Speed Dial feature.
b Press the key (1 to 9) corresponding to the
number you want to call, or press “0” if you
want to call the last number dialed.
Phone
Phone
Phone.fm Page 37 Monday, September 30, 2002 2:10 PM