Motorola MOTOTRBO XPR 4580 - Manual (Page 26)

Receiving and Making Calls
English
16
2 The display shows the phone list, you can scroll through and
select the required ID (any target ID or last transmitted or
received ID) or go to the manual dial option to enter the
required ID.
3 Press the PTT button to initiate the Phone Call request. The
green LED lights up.
4 The first line of the display shows Calling. The second line
displays the target alias or ID and the Phone Call icon. The
dial tone will be heard, then DTMF tone sounded for phone
ID Transmission.
5 After phone number transmission, the first line of the display
shows the phone alias or number and the Phone Call icon,
the second line displays Phone Call, and you may hear the
voice from the telephone user.
6 Press the PTT button to talk. Release the PTT button to
listen.
Sending a Status Call
This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of eight status conditions is possible.
NOTE: The radio automatically exits the feature, if the time-out
timer is enabled, when the radio is left idle and the
timer expires. You will hear the Menu Inactive Exit Tone
upon feature exit.
Procedure:
Press the programmed Status button and proceed to Step 3.
OR
Follow the procedure below.
1 P or Q to Status and press N to select.
2 The display shows the last acknowledged status call, or the
first status in the list.
3 P or Q to the required status.
4 Press N to send the status.
5 When the dispatcher acknowledges, four tones sound and
the display shows Ack Received. The radio returns to
normal dispatch operation.
OR
If no acknowledgment is received, a low-pitched tone
sounds and the display shows No Acknowledge.

NAG_LACR.book Page 16 Thursday, November 12, 2009 10:17 AM