Scan, Starting and stopping scan, Advanced features – Motorola MOTOTRBO XPR 4580 User Manual
Page 31
Advanced Features
English
21
7
The display shows Entry Saved before returning to the
previous screen.
8
The priority icon appears left of the member’s name.
There is no priority icon if priority is set to None.
Scan
When you start a scan, your radio cycles through the
programmed scan list for the current channel looking for voice
activity.
The yellow LED blinks and you see the scan icon on the display.
There are two ways of initiating scan:
•
Main Channel Scan (Manual): Your radio scans all the
channels/groups in your scan list. On entering scan, your
radio may – depending on the settings – automatically start
on the last scanned “active” channel/group or on the channel
where scan was initiated.
•
Auto Scan (Automatic): Your radio automatically starts
scanning when you select a channel/group that has Auto
Scan enabled.
Starting and Stopping Scan
Procedure:
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
1
Use the Channel Rocker to select a channel programmed
with a scan list.
2
S
to access the menu.
3
P
or
Q
to Scan and press
N
to select.
4
The display shows Turn On if scan is disabled.
OR
The display shows Turn Off if scan is enabled.
5
Press
N
to select.
6
The yellow LED blinks and the scan icon is displayed when
Scan is enabled.
OR
The LED turns off and the scan icon is not displayed when
Scan is disabled.
NAG_LACR.book Page 21 Thursday, November 12, 2009 10:17 AM