Motorola VT2142 - Manual (Page 25)

VT2142 Voice Gateway User Guide 15
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP
WAN Configuration
1 Log in to the VT2142 (see “Logging In to the VT2142” on page 12).
2 Click SETUP.
3 Click WAN Configuration.
4 From the Type drop-down list, choose one of:
PPPoE PPPoE is used with all DSL modems See “WAN Setup for PPPoE (DSL)” on
page 16
Static For some cable modems, the cable company assigns the
cable modem a static (unchanging) IP address. You must
provide the IP address, subnet mask, default gateway,
and one to three domain name server (DNS) addresses. See “WAN Setup for a Static IP Address
(Cable Modem)” on page 17
DHCP Most cable modems have a dynamic IP address assigned
by the cable company DHCP server. Typically no
additional configuration is needed for the VT2142. See “WAN Setup for a Static IP Address
(Cable Modem)” on page 19