Motorola VT2142 - Manual (Page 34)

VT2142 Voice Gateway User Guide 24
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration:
Basic Advanced TCP/IP
IP QoS
IP quality of service (QoS) enables you to assign priority to Internet traffic based on the source and destination IP
addresses, source and destination ports, packet length, and protocol.
IP QoS fields and buttons
Field or Button Description
Enable IPQoS
If selected, traffic prioritization is enabled (the default).
Trusted Mode
If enabled (the default), all IP QoS traffic rules are applied first, regardless of the TOS bit
settings. After the rules are exhausted, the existing TOS bit settings are honored.
If disabled, all rules are also applied, except if there is no match, a default rule of queuing
priority Low is used.
Add
Displays the IP QoS Traffic Rule window, where you can define rules.
This table
displays all
defined
rules