Ip qos traffic rule – Motorola VT2142 User Manual
Page 35
VT2142 Voice Gateway User Guide
25
IP QoS Traffic Rule
This window displays when you click Add on the
window. It enables you to define rules for filtering
packets.
IP QoS Traffic Rule fields
Field
Description
Rule Name
The rule name
Source IP
Sets the source IP address for the rule
Source Start Port
Sets the source start port
Destination IP
Sets the destination IP address
Destination Start Port
Sets the destination start port
Packet Length Start
Sets the minimum packet size for the rule
Protocol
Sets the protocol — TCP, UDP, ICMP, or Any
Traffic Priority
Sets the priority for traffic matching these characteristics — High or Low
Source Netmask
Sets the source subnet mask, which along with the Source IP specifies a range of source
IP addresses
Source End Port
Sets the source end port
Destination Netmask
Sets the destination subnet mask, which along with the Destination IP specifies a range of
destination IP addresses
Destination End Port
Sets the destination end port
Packet Length End
Sets the maximum packet size allowed by the rule
Physical Port
Can be none or Eth0