Motion CL900 FWS-001 - Manual (Page 14)

8 Chapter 1 Getting Started Where to begin with your CL900
Where to begin with your CL900
Here are some steps you can follow to power up and get familiar with your CL900 Tablet PC.
Step 1: Power up the tablet
1. Pull out the port door located at the bottom of the left side of the CL900 to expose the
AC adapter port and plug in the AC adapter.
Powering up the CL900
2. Plug the power cord into an outlet.
• The battery gauge turns amber to indicate that the battery is charging.
• Keep the tablet on AC power until the battery is fully charged.
3. Press and release the power button located on the top left side of the CL900 to turn
it on.
4. Follow the on-screen instructions to set up your user account and install Windows 7.
Step 2: Connect to a wireless network
The CL900 comes with built-in Wi-Fi and Bluetooth. Your tablet may also be equipped with
mobile broadband for accessing the Internet.
To set up available wireless networks:
• Enable wireless from the Motion Dashboard
• Set up Wi-Fi
• Set up mobile broadband with GPS
• Set up Bluetooth
Enable wireless from the Motion Dashboard
The first task when setting up wireless is to enable the wireless network adapters from the
Motion Dashboard. The Dashboard is a Motion Computing application for configuring your
CL900 Tablet PC.
power
adapter port power button battery gauge
CTRL+ALT+DEL