Motion CL900 FWS-001 - Manual (Page 18)

12 Chapter 1 Getting Started Optional setup tasks
For more information on power options, see “Changing how the power button functions”
on page 50.
Optional setup tasks
Here are some other tasks you may want to do when you start out with your CL900.
Create a recovery image
Once you have set up your CL900 the way you like it, including installing your applications,
create a system image on an external USB drive. This is a safety measure in the unfortunate
event that your system stops working.
A system image is an exact copy of a drive and includes Windows 7, your system settings,
programs, and files. For more information, see “Creating a system image” on page 52.
Insert the pen battery
The pen comes in a separate package with a AAAA battery and pen tether.
To insert the pen battery
1. Unscrew the pen cap.
2. With the plus side of the battery towards the pen tip, insert the battery in the cavity of
the pen.
Pen and battery
3. Screw the pen cap in place.
N OTE : The tablet displays a low-battery warning when the pen battery has less than 20%
remaining.
Attach the pen tether
The CL900 pen comes with a tether so that you can attach the pen to your tablet or docking
station to avoid misplacing it. The tether is essentially a string with loops at each end.
To attach the pen tether
1. Slip one end of the tether through the hole at the end of the pen, then pull the pen
through the loop until it is tight.
2. Slip the other end of the tether through the attach point on the CL900 then pull the pen
through the loop until it is tight.