Motorola ME4251 - Manual (Page 10)

Connecting the Base Station and Mains Adaptor
1. Feed the mains power adaptor cord and the
telephone line cord through the small hole in
the base stand as shown.
2. Insert the telephone line cord into the
corresponding socket on the base station.
3. Connect the mains power adaptor plug in the
corresponding socket on the underneath of
the base station.
4. Attach the base stand to the main part of
the base:
Insert the 2 small plastic tabs on the stand
into the 2 upper slotson the base (as shown).
Holding the stand with one hand on each of
the 2 clips, gently squeeze the clips inwards and down into the lower slots on the
base (as shown). The stand will click into place. Check the stand is secure before
placing on your chosen surface.
5. Connect the mains power adaptor to the mains wall socket and switch the
power on.
6. Connect the telephone line cord to the telephone socket.
The base station is now ready for use.
Note: The base station does not have a power switch.
Only use the mains adaptor supplied with your phone.
9
In
st
al
la
ti
o
n
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 9