Motorola ME4251 - Manual (Page 18)

17
U
si
n
g
th
e
Te
le
p
h
o
n
e
Direct dialling
1. Press the
key and wait for the dialling tone.
2. Dial the telephone number and complete the call.
When the call is connected, the call duration will be displayed and will remain in the
display until 3 seconds after the call is ended.
The call timer format is HH:MM:SS.
3. Press the
key to end the call.
On-hook dialling (pre-dialling)
1. Dial the telephone number.
2. Delete any incorrect digits by pressing the SKR key.
3. Press the
key. The displayed number is dialled.
4. To end the call, press the key.
Using the Handsfree Speakerphone
In handsfree mode, all communication is via the handset speakerphone and
microphone, leaving your 'hands free'.
You can make a call handsfree or switch to handsfree during a call.
Make a handsfree call
In standby mode:
1. Dial the telephone number and press the
key. The handset speaker comes on.
2. Press the key and wait until the handset speaker comes on, then dial the
telephone number as required.
3. Hold your conversation - speak to the caller through the microphone and listen
over the speaker.
4. Press the key to end the call.
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 17