Macsense Connectivity MIH-108 - Manual (Page 14)

Mac OS TCP/IP Configuration
1. Open the TCP/IP control panel.
2. In Connect via field, select Ethernet if you intend to use the built-in
Ethernet interface on mainboard, or select an alternate network driver
if you have a third party Ethernet adapter installed in your computer.
3. In the Configure pull-down menu that appears, select Using DHCP
Server to allow the built-in DHCP server of the PalmRouter Elite to
assign an IP address and other TCP/IP configuration information to the
client automatically. Do this for each client that needs Internet access
through the PalmRouter Elite
Easy Installation
11