Macsense Connectivity MIH-108 - Manual (Page 29)

3. Click the button beside the File Name field. This will bring up a win-
dow allowing you to specify the location of the firmware file
ÓCode.binÓ.
4. Click the Upgrade button and the upgrade process will begin. After
the upgrade is complete remember to reset the PalmRouter Elite. This
can be done by unplugging the device and then plugging it back in.
Note: Keep the firmware file name ÓCode.binÓ unchanged or the TFTP
client software wonÕt recognize it.
5. If the upgrade has failed, the lights of Modem1 and Modem2 in the
PalmRouter Elite will flash back and forth. If this happens, try repeat-
ing steps 2 - 4 of this procedure.
Advanced Configuration
26