Motorola ATCA-717 - Manual (Page 41)

Requirements Installation
PENT/ATCA−717 41
Characteristic Value
Max. current 3.6A
Max. power consumption of blade equipped with
4 GByte SDRAM without accessories 75W
Max. total power consumption of all four PMC
sites 60W
Max. total power consumption of all installed
blade accessories (PMCs + hard disk) 65W
The blade provides two independent power inputs according to the AdvancedTCA
Specification. Each input has to be equipped with an additional fuse of max. 90A located
either in the shelf where the blade is installed or the power entry module (PEM).