Miele G848 - Manual (Page 41)

Problem Possible cause Remedy
The “Intake/Drain” indi-
cator light flashes, and
the program stops.
Before searching for the
problem:
– Turn the program
selector to “Stop”.
– Turn the dishwasher off
using the “On/Off”
button.
Not enough water is en-
tering the machine. – Open the water valve
completely.
– Check the intake filter
and clean if necessary,
see “Cleaning and
care”.
– Check the water level
and increase the intake
time if necessary, see
“Checking the water
level”.
Water remains in the
wash cabinet at the end
of a program. – Clean the filter combi-
nation, see “Cleaning
and care”.
– Clean the drain pump
and the non-return
valve, see “Solving
problems”.
– Remove any kinks in
the drain hose.
Problem solving
41