Miele G848 - Manual (Page 42)

Problem Possible cause Remedy
The “End” and “Start”
indicators flash simulta-
neously.
A service call may be
needed. – Turn the program se-
lector to “Stop”.
– Turn off the dishwasher
using the “On/Off” but-
ton.
After a few seconds:
– Turn on the dishwasher
with the “On/Off” but-
ton.
– Turn the program se-
lector to desired pro-
gram.
– Press the “Start” but-
ton.
If the indicator lights flash
again:
– Call the Miele Techni-
cal Service Dept.
Despite the problem the
dishwasher can still be
used in all programs but,
the water will not heat.
Knocking noise in the
wash cabinet
The spray arm is hitting
something in the basket. Interrupt the program and
rearrange items blocking
the spray arms.
Rattling from within the
dishwasher
The dishes are moving
around inside the dish-
washer. Interrupt the program and
secure items inside.
A whistling noise is
heard during the pro-
gram.
The circulation pump seal
sometimes makes a whis-
tling noise. This may be
caused by detergent. This is not a problem. Try
other detergents. Contact
the Miele Technical Ser-
vice Department if the
noise persistent.
Problem solving
42