Motorola H65XAN6RR4BN - Manual (Page 31)

23
Channels and Codes
2 Scroll to Code.
3 Press
A under Edit.
4 Select a code.
5 When you are finished, press
A under Back to
return to the Talk Around idle screen.
Making and Receiving Code Calls in
Mike’s Talk Around
To make a code call in Mike’s Talk Around:
1 Press and hold the PTT button. Transmit
appears on the first line of display. Begin
speaking after your handset emits the Mike’s
Talk Around tone.
2 Release the PTT button to listen.
The tone emitted from your handset when using
Mike’s Talk Around is 4 beeps and sounds different
from the standard tone heard with on-network
Private and group calls.
If you receive an error message:
• There may be no parties on your channel or
code.
• You are out of range.
When you receive a code call using Mike’s Talk
Around, Receive appears on the first line of the
display.
Note: An incoming Mike’s Talk Around call can
be terminated at any time by pressing
e .
Receive All
You can set your handset to receive Mike’s Talk
Around transmissions from any handset that is set
to the same channel, regardless of the code (1-15),
by setting the code to Receive All. When you
receive transmissions with the code set to Receive
All, the display changes from Receive All to the
code on which the transmission was received.
Tip: You can reply to an incoming call within 6
seconds after hearing the short ending
beep by pressing the PTT button.
Note: You cannot initiate a code call when the
code is set to Receive All. If you press
the PTT button with the code set to
Receive All, you will receive an error
message.
To set the code to Receive All:
1 From the Talk Around idle screen, press A
under Edit.
2 Scroll to Code.
3 Press
A under Edit.
4 Select Receive All.