Mercedes-Benz 2002 CL 600 - Manual (Page 148)

145 Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
1 Preliminary display of the individual settings
2 “SETTINGS” – the menu “LIGHTING” can be called
up in this option menu.
3 Selection marker
Pressing button
æ or ç on the multifunction
steering wheel controls the selection marker.
4 “LAMP CIRCUIT HEADLAMP” 1, 2 , see page 160.
5 “LOCATOR LIGHTING”, see page 163.
6 “HEADLAMPS DELAYED SHUT-OFF”, see “Night
security illumination” on page 162.
7 “INTERIOR LAMP DELAYED SHUT-OFF”, see
“Interior lighting” on page 189.
8 Returning the setting menu “LIGHTING” to the
factory setting.
9 Acknowledgment
1 Except Canada
2 For safety reasons, setting only possible while vehicle is standing
still.
Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
“SETTINGS” (2) is displayed.
Press button æ or ç until the menu “LIGHTING”
is selected by the selection marker (3).
Press the j or k button until the required
display (4 to 7) is displayed. Pressing the æ or ç
button controls the selection marker. The settings made
are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus. Pressing the
è or ÿ button displays the
next or previous system.
J_OM_215.book Seite 145 Mittwoch, 30. Mai 2001 2:01 14