Esp control switch – Mercedes-Benz 2002 CL 600 User Manual

Page 283

Advertising
background image

280

Driving systems

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

ESP control switch

ESP control switch located on center console.

1

Press to switch ESP off

ESP warning lamp

v, located in speedometer

dial, comes on.

2

Press to switch ESP on

ESP warning lamp

v, located in speedometer

dial, goes out.

To improve the vehicle’s traction when driving with
snow chains, or starting off in deep snow, sand or gravel,
switch off ESP by pressing the upper half (1) of the ESP
switch. The ESP warning lamp

v, located in the

speedometer dial, is continuously illuminated.

With the ESP system switched off, the engine torque
reduction feature is cancelled. Therefore, the enhanced
vehicle stability offered by ESP is unavailable.

Adapt your speed and driving to the prevailing road
conditions.

A portion of the ESP system remains active, even with
the switch in the OFF position.

If one drive wheel loses traction and begins to spin, the
brake is applied until the wheel regains sufficient
traction. The traction control engages at vehicle speeds
up to approximately 24 mph (40 km/h), and switches off
at 50 mph (80 km/h).

Warning!

When the ESP warning lamp is illuminated
continuously, the ESP is switched off.

Adapt your speed and driving to the prevailing road
conditions.

J_OM_215.book Seite 280 Mittwoch, 30. Mai 2001 2:01 14

Advertising
This manual is related to the following products: