Power windows:synchronizing – Mercedes-Benz 2002 CL 600 User Manual

Page 188

Advertising
background image

185

Interior equipment

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Blocking of rear side window operation

If no operation of the rear side windows by switch (for
instance by children) is desired, slide override
switch (5) to the right; the

N symbol becomes

visible, see page 183.

Operation of the rear side windows with the switches
located in the driver’s door is still possible.

Synchronizing power windows

If the power supply was interrupted, (battery
disconnected or low), the windows cannot be opened or
closed by the express feature.

To resynchronize the express feature, press

j side of

power window switch until the window is completely
closed and hold down for approximately 1 second.
Repeat procedure for each window.

The automatic full opening and closing procedure of the
windows should now be restored.

Warning!

When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.

In case of obstruction, the automatic reversal will
not operate if a door window is being closed by
pressing the switch to its resistance point and
holding it there, or when using the electronic key.

The closing procedure of door windows can be
immediately reversed by either pressing the switch
or pressing button

Πon the electronic key and

holding it, or (vehicle with KEYLESS-GO) when
carrying the KEYLESS-GO-card, pull and hold a
door handle.

When leaving the vehicle, always remove the
electronic key from starter switch, take the
KEYLESS-GO-card (if so equipped) with you, and
lock your vehicle. Do not leave children unattended
in the vehicle, or with access to an unlocked
vehicle. Unsupervised use of vehicle equipment
can cause serious personal injury.

J_OM_215.book Seite 185 Mittwoch, 30. Mai 2001 2:01 14

Advertising
This manual is related to the following products: