Chip-card (keyless-go) – Mercedes-Benz 2002 CL 600 User Manual

Page 327

Advertising
background image

324

Malfunction and warning messages

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

CHIP-CARD (KEYLESS-GO)

* C = Category, see page 303.

1 Check battery of KEYLESS-GO-card, see page 372.

2 The KEYLESS-GO-card cannot be recognized by the running

engine (e.g. strong radio-frequency interference) or the card is not
in the vehicle.
Stop immediately and search for the KEYLESS-GO-card or continue
to operate the vehicle with the electronic key, otherwise the vehicle
cannot be centrally locked or the engine started again after the
engine stops automatically. See page 37.

3 The KEYLESS-GO-card was momentarily not recognized. If

message repeats, place card in a different position or continue to
operate the vehicle with the electronic key, see page 37.

4 A KEYLESS-GO-card left inside the vehicle has been recognized

while locking the vehicle from the outside, see page 37.

5 The message appears for a maximum 60 seconds each time the

driver’s door is opened, as long as no electronic key is in the
starter switch. The message appears regardless of the past
operation method (electronic key or KEYLESS-GO-card), see
page 37.

Line 1

Line 2

C*

CHIP CARD

CHECK BATTERY!

1

2

CHIP CARD

NOT RECOGNIZED!

2

1

CHIP CARD

NOT RECOGNIZED!

3

2

CHIP CARD

STILL IN VEHICLE!

4

1

CHIP CARD

DO NOT FORGET!

5

1

J_OM_215.book Seite 324 Mittwoch, 30. Mai 2001 2:01 14

Advertising
This manual is related to the following products: