Gasoline additives, Coolants, Gasoline additives coolants – Mercedes-Benz 2002 CL 600 User Manual

Page 406

Advertising
background image

403

Fuels, coolants, lubricants etc. - capacities

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Gasoline additives

A major concern among engine manufacturers is carbon
build up caused by gasoline. Mercedes-Benz
recommends the use of only quality gasoline containing
additives that prevent the build up of carbon deposits.

After an extended period of using fuels without such
additives, carbon deposits can build up especially on the
intake valves and in the combustion area, leading to
engine performance problems such as:

warm-up hesitation,

unstable idle,

knocking/pinging,

misfire,

power loss.

Do not blend other specific fuel additives with fuel.
They only result in unnecessary cost, and may be
harmful to the engine operation.

Damage or malfunctions resulting from poor fuel
quality or from blending specific fuel additives are not
covered by the Mercedes-Benz Limited Warranty.

Coolants

The engine coolant is a mixture of water and
anticorrosion/antifreeze, which provides:

corrosion protection,

freeze protection,

boiling protection (by increasing the boiling point).

The cooling system was filled at the factory with a
coolant providing freeze protection to approximately
-22

°

F (-30

°

C) and corrosion protection.

If the antifreeze mixture is effective to -22

°

F (-30

°

C), the

boiling point of the coolant in the pressurized cooling
system is reached at approximately 266

°

F (130

°

C).

The coolant solution must be used year round to provide
the necessary corrosion protection and increase in the
boil-over protection. You should have it replaced every
3 years.

To provide the important corrosion protection, the
solution must be at least 45% anticorrosion/antifreeze
(equals a freeze protection to approx. - 22

°

F [-30

°

C]). If

you use a solution that is more than 55% anticorrosion/
antifreeze (freeze protection to approx. - 49

°

F [-45

°

C]),

J_OM_215.book Seite 403 Mittwoch, 30. Mai 2001 2:01 14

Advertising
This manual is related to the following products: