Self-test babysmart – Mercedes-Benz 2002 CL 600 User Manual

Page 92

Advertising
background image

89

Restraint systems

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Self-test BabySmart

TM

without special child seat

installed

After turning electronic key in starter switch to
position 1 or 2, the

7 indicator lamp located on the

center console comes on for approximately 6 seconds
and then extinguishes.

If the indicator lamp should not come on or is
continuously lit, the system is not functioning. You must
see an authorized Mercedes-Benz Center before seating
any child on the front passenger seat. See page 302 for
notes on the

7 indicator lamp.

BabySmart

TM

is a trademark of Siemens Automotive Corp.

Warning!

The BabySmart

TM

airbag deactivation system will

ONLY work with a special child seat designed to
operate with it. It will not work with child seats
which are not BabySmart

TM

compatible.

Never place anything between seat cushion and
child seat (e.g. pillow), since it reduces the
effectiveness of the deactivation system. The
bottom of the child seat must make full contact
with the passenger seat cushion. An incorrectly
mounted child seat could cause injuries to the
child in case of an accident instead of protecting
the child.

Follow the manufacturer’s instructions for
installation of special child seats.

The passenger front airbag will not deploy only if
the

7 indicator lamp remains illuminated.

Please be sure to check the indicator every time
you use the special system child seat. Should the
light go out while the restraint is installed, please
check installation. If the light remains out, do not
use the BabySmart

TM

restraint to transport children

on the front passenger seat until the system has
been repaired.

J_OM_215.book Seite 89 Mittwoch, 30. Mai 2001 2:01 14

Advertising
This manual is related to the following products: