Motorola USB08 User Manual
Page 101
Source Code Files
Contents
USB08 Evaluation Board
Designer Reference Manual
MOTOROLA
Source Code Files
101
const interface_descriptor InterfaceDesc =
{
// Size of this Descriptor in Bytes
sizeof(interface_descriptor),
DT_INTERFACE,
// Descriptor Type (=4)
0,
// Number of *this* Interface (0..)
0,
// Alternative for this Interface (if any)
2,
// No of EPs used by this IF (excl. EP0)
0xff,
// IF Class Code (0xff = Vendor specific)
0x01,
// Interface Subclass Code
0xff,
// IF Protocol Code (0xff = Vendor specific)
0
// Index of String Desc for this Interface
}; // end of InterfaceDesc
//----------------------------------------------------------------------------
const endpoint_descriptor Endpoint1Desc =
{
// Size of this Descriptor in Bytes
sizeof(endpoint_descriptor),
DT_ENDPOINT,
// Descriptor Type (=5)
0x81,
// Endpoint Address (EP1, IN)
0x03,
// Interrupt
{0x08, 0x00},
// Max. Endpoint Packet Size
10
// Polling Interval (Interrupt) in ms
}; // end of Endpoint1Desc
//----------------------------------------------------------------------------
const endpoint_descriptor Endpoint2Desc =
{
// Size of this Descriptor in Bytes
sizeof(endpoint_descriptor),
DT_ENDPOINT,
// Descriptor Type (=5)
0x02,
// Endpoint Address (EP2, OUT)
0x03,
// Interrupt
{0x08, 0x00},
// Max. Endpoint Packet Size
10
// Polling Interval (Interrupt) in ms
}; // end of Endpoint2Desc
//----------------------------------------------------------------------------
// Language IDs
//--------------
#define SD0LEN 4
//--------------
const uchar String0Desc[SD0LEN] = {
// Size, Type
SD0LEN, DT_STRING,
// LangID Codes
0x09, 0x04
};