English, Recording time available, Tam alert – Motorola D210 User Manual
Page 17: Call screening, Answering mode
15
English
first in the order they were received. Then you can play back
all messages, new and old.
Recording time available
Up to 10 minutes of messages can be recorded. Press
to
play your messages.
The total number of new (or old) messages is announced.
As each message is played, the day and time the message was
received are announced.
Use
or
to adjust the volume during playback.
During message playback:
Press
to skip forwards and play the next message.
Press
to replay the current message.
If you press while the day/time are playing back, the previous
message will be played back.
Press
to stop message playback.
Press
to delete the currently playing message.
You can also play back your message from the handset by
following step:
1. Press
to access the main menu.
2. Press or to select "
TAM" and press
.
3. Press or to select "
PLAY MESSAGE" and press
.
While playing a message, you can skip, repeat, and delete the
message by pressing the handset button.
Delete all old messages and memo
You cannot delete new messages. You must listen to
messages before they can be deleted.
Press and hold
. Then you will hear "All messages deleted."
TAM Alert
When the message alert is on, and you have new messages
stored on your answering machine, you will hear a tone every
60 seconds. The message alert can be set to On or Off.
In standby mode:
1. Press
to access the main menu.
2. Press or to select "
TAM" and press
.
3. Press or to select "
TAM SETTINGS" and press
.
4. Press or to select "
TAM ALERT" and press
.
5. Press or to select "
ON" or "OFF" and press
.
Call screening
When a caller is leaving a message you can listen in over the
base loudspeaker and decide if you want to take the call in
person.
Answering Mode
You can set different answering modes. Choose from "
ANS WITH
REC" or "ANS NO REC". "ANS WITH REC" allows user to leave a
Button Function
Skip the message
Repeat the message
Delete the message
Stop playing the message
Button Function
Allegro_CID TAD.book Page 15 Tuesday, January 15, 2008 4:30 PM