Motorola D210 - Manual (Page 6)

4
English
Over time, as the batteries wear out, the charge capacity will
reduce, so reducing the talk/standby time of the handset.
Eventually the batteries will need to be replaced.
Setting the answering machine date
and time
Your answering machine comes pre-set to 'Answer On' and is
ready to answer calls and take messages. So that you know
exactly when each call was received, you should set the
correct date and time.
Setting the date and time
The phone uses the 12 or 24 hour clock.
In standby mode:
1. Press .
2. Press or to select " HS SETTINGS" and press .
3. Press or to select " DATE & TIME" and press .
4. Press or to select " DATE FORMAT" and press .
5. Press or to select " MM - DD" or "DD - MM" and press .
6. Press or until " TIME FORMAT" is displayed and press
.
7. Press or to select " 24 - HOUR" or "12 - HOUR" and press
.
8. Press or until " SET TIME" is displayed and press .
9. Enter Hour and Minute using the keypad, and press .
10.Press or until " DAY OF WEEK" is displayed and press
.
11.Press or to select day of the week and press .
For further information on how to use the answering machine,
see page 13.
Connecting the telephone line cord
Connect the telephone line cord into the TEL LINE socket on
the back of the base. Connect the telephone line cord adapter
to the other end and plug into the telephone wall socket.
Only use the telephone line cord supplied or your phone may
not work correctly.
Setup is now complete. You can make and receive calls on
your phone.
Allegro_CID TAD.book Page 4 Tuesday, January 15, 2008 4:30 PM