Motorola D210 - Manual (Page 19)

17
English
Check the remote security PIN code
1. Press to access the main menu.
2. Press or to select " TAM" and press .
3. Press or to select " TAM SETTINGS" and press .
4. Press or to select " SECURE CODE" and press .
5. Change the remote security PIN code using the number
keypad and press .
To operate your phone remotely from another phone, you
need to enter the remote PIN code. For security reasons you
should change this code.
Always keep a record of your remote PIN code. The remote
PIN code is different from the base PIN code.
TAM Default
If you reset your answering machine, it will return to its pre-set
(default) settings.
1. Press to access the main menu.
2. Press or to select "
TAM" and press
.
3. Press or to select " TAM SETTINGS" and press .
4. Press or to select " TAM DEFAULT" and press .
5. " PIN ?" appears. Enter your base PIN code. Press .
The handset will reset and return to standby mode.
10. Handset and base menu
settings
Handset earpiece
There are 5 earpiece volumes to choose from.
1. Press to access the main menu.
2. Press or to select " HS SETTINGS" and press .
3. Press or to select " AUDIO SETUP" and press .
4. Press or to select " EARPIECE V." and press .
5. Press or to select the volume you want, then press
to confirm.
Handset speaker
There are 5 speaker volumes to choose from.
1. Press to access the main menu.
2. Press or to select " HS SETTINGS" and press .
3. Press or to select " AUDIO SETUP" and press .
4. Press or to select " SPEAKER V." and press .
5. Press or to select the volume you want, then press
to confirm.
Play messages
Delete all messages
Switch answering machine On/Off
Record OGM
Button Function
Allegro_CID TAD.book Page 17 Tuesday, January 15, 2008 4:30 PM