Minolta Dimage 5 - Manual (Page 132)

DISCONNECTING THE CAMERA FROM THE COMPUTER
132
DATA-TRANSFER MODE
WINDOWS ME AND WINDOWS 2000
Confirm that the access lamp is not lit. Turn the mode dial to another position and then
disconnect the USB cable.
Never disconnect the camera when the access lamp is lit - the data or
CompactFlash card may be permanently damaged.
To disconnect the camera, click once on the unplug-or-eject-hardware icon
located on the task bar. A small window will open indicating the device to
be stopped.
WINDOWS 98
When more then one external device is connected to the computer, the
unplug-or-eject-hardware window can be used. To disconnect the camera,
double click on the unplug-or-eject-hardware icon located on the task bar
to activate the window.
Click on the small window
to stop the device. The
safe-to remove-hardware
window will appear. Click
“OK.” Turn the mode dial to
another position and then
disconnect the USB cable.