Minolta Dimage 5 - Manual (Page 134)

134
DATA-TRANSFER MODE
CHANGING THE COMPACTFLASH CARD (DATA-TRANSFER MODE)
Care should be taken when changing CompactFlash cards while the camera is
attached to the computer. Data could be lost or damaged if the camera is not properly
disconnected.
WINDOWS 98
1. Turn off the camera.
2. Change the CompactFlash card.
3. Turn on the camera.
4. Use the data-transfer menu to remake the USB connection.
WINDOWS ME AND 2000
MACINTOSH
Always confirm the access lamp is out
before removing the CompactFlash card.
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 132).
2. Turn off the camera.
3. Change the CompactFlash card.
4. Turn on the camera.
5. Use the data-transfer menu to remake the USB connection.
1. Stop the USB connection by dragging the drive icon into the trash (p. 133).
2. Turn off the camera.
3. Change the CompactFlash card.
4. Turn on the camera.
5. Use the data-transfer menu to remake the USB connection.