MITSUBISHI ELECTRIC XD450U - Manual (Page 19)

EN - 19
ENGLISH
Image adjustment
CONTRAST R
COLOR TEMP.-USER
0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS B 0
CONTRAST
IMAGE
0
BRIGHTNESS 0
STANDARD
0
COLOR
AUTO
0
XGA60
CineRichColor AUTO
COMPUTER
OFF
TINT
0 SHARPNESS
COLOR TEMP.
GAMMA MODE
COLOR MATRIX
sRGB
opt.
4. Press the  or  button to select the desired color.
• If you want to adjust the all color balance of the
image, select RGB-TINT.
5. Press the  or  button to adjust the color balance
of the selected color.
6. Repeat steps 4 and 5 for optimum adjustment re-
sults.
7. Exit the menu by pressing the MENU button several
times.
• When the input source is VIDEO or COMPUTER, the
setting items in the color matrix adjustment are au-
tomatically set to the predetermined values. You can
change these settings manually.
• To cancel the color matrix adjustment, select OFF in
step 2.
• When the color matrix adjustment is carried out, the
colors in the menu will also vary. This isn't a product
malfunction.
Color temperature
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the  or  button to select USER .
3. Press the ENTER button.
4. Press the  or  button to select the desired item.
5. Press the  or  button to adjust the selected item.
6. Repeat steps 4 and 5 for optimum adjustment re-
sults.
7. Exit the menu by pressing the MENU button several
times.
COLOR MATRIX
0
0
0
0
0
0
0
RED
RGB-TINT
GREEN
BLUE
YELLOW
CYAN
MAGENTA
About color temperature
There are different kinds of white color. Color tem-
perature is a way to show the differences in white.
White of which temperature is low appears reddish.
When the color temperature rises, white appears blu-
ish. This projector adjusts this color temperature by
changing the values of contrast blue and red.
To rise the color temperature:
Increase the CONTRAST B (blue) and decrease the
CONTRAST R (red).
To reduce the color temperature:
Decrease the CONTRAST B (blue) and increase the
CONTRAST R (red).
Image adjustment
You can adjust the image using the IMAGE menu.
To control the white-to-black level of the image :
Adjust CONTRAST in the IMAGE menu. Press the 
button to increase the contrast and the  button to
reduce it.
To control the light level of the image :
Adjust BRIGHTNESS in the IMAGE menu. Press the 
button to lighten the image and the  button to darken
it.
To determine the intensity of the color :
Adjust COLOR in the IMAGE menu. Press the  but-
ton to increase the amount of color in the image and
the  button to decrease it.
To adjust the red-green color balance of the image :
Adjust TINT in the IMAGE menu. Press the  button to
increase the amount of green in the image and the 
button to increase the amount of red in the image.
To adjust the detail and clarity of the image :
Adjust SHARPNESS in the IMAGE menu. Press the 
button to sharpen the image and the  button to soften
the image.
Color matrix
This projector adjusts the color balance in each color of
RGB (red, green, and blue), and their neutral colors (yel-
low, cyan, and magenta) by the color correction adjust-
ment. Use the color correct adjustment when you want
to emphasize color or when only a certain color balance
is not correctly adjusted.
1. Select COLOR MATRIX in the IMAGE menu.
2. Press the  or  button to select USER .
3. Press the ENTER button.