Maxtor QUICKVIEW ATA - Manual (Page 37)

Product Specifications
4-8 Maxtor QuickView 400/500GB Serial ATA Hard Disk Drive
4.10 EMC/EMI
4.10.1 Radiated Electromagnetic Field Emissions - EMC Compliance
The hard disk drive mechanism is designed as a subassembly for installation into a
suitable enclosure and is therefore not subject to Subpart J of Part 15 of FCC Rules
(47CFR15) or the Canadian Department of Communications Radio Interference
Regulations. Although not required, the disk mechanism has been tested within a
suitable end-use product and found to comply with Class B limits of the FCC Rules
and Regulations of the Canadian Department of Communications.
The CE Marking indicates conformity with the European Union Low Voltage
Directive (73/23/EEC) when the disk mechanism is installed in a typical personal
computer. Maxtor recommends that testing and analysis for EMC compliance be
performed with the disk mechanism installed within the user's end-use application.
4.10.2 Canadian Emissions Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations of the Canadian
department of communications.
Le present appareil numerique n'emet pas de bruit radioelectriques depassant les
limites applicables aux appareils numeriques de Class B prescrites dans le reglement
sur le brouillage radioelectrique edicte pa le ministere des communications du
Canada.
4.11 Safety Regulatory Compliance
All Maxtor hard drives comply with relevant product safety standards such as CE,
CUL, TUV and UL rules and regulations. As delivered, Maxtor hard drives are
designed for system integration before they are used.