Maxtor QUICKVIEW ATA - Manual (Page 41)

SATA Bus Interface and ATA Commands
5-4 Maxtor QuickView 400/500GB Serial ATA Hard Disk Drive
5.5.3 Identify Drive Command
This command allows the host to receive parameter information from the drive.
SMART DISABLE OPERATIONS B0h D9h
SMART ENABLE OPERATIONS B0h D8h
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE B0h D2h
SMART EXECUTE OFF-LINE IMMEDIATE B0h D4h
SMART READ DATA B0h D0h
SMART READ LOG B0h D5h
SMART RETURN STATUS B0h DAh
SMART SAVE ATTRIBUTE VALUES B0h D3h
SMART WRITE LOG B0h D6h
STANDBY 96h, E2h
STANDBY IMMEDIATE 94h, E0h
WRITE BUFFER E8h
WRITE DMA CAh, CBh
WRITE DMA EXTENSION 35h
WRITE DMA FUA EXTENSION 30h
WRITE FPDMA QUEUED 61h
WRITE LOG EXTENSION 3fh
WRITE MULTIPLE C5h
WRITE MULTIPLE EXTENSION 39h
WRITE MULTIPLE FUA EXTENSION CEh
WRITE SECTOR(S) 30h, 31h
WRITE SECTOR(S) EXTENSION 34h
Table 5-1
Supported Commands
Command
Command
Code
Feature
Register
Value(s)