Magikitch'n MKG36 - Manual (Page 3)

L25-012 Rev 1 (08/02) 1
CHECKING YOUR NEW GRIDDLE
Your new griddle has been carefully packed into one crate. Every effort has been made to ensure that you
new griddle is delivered to you in perfect condition. As you unpack your new appliance, inspect each of
the pieces for damage. If something is damaged, DO NOT sign the bill of lading. Contact the shipper
immediately; the shipper is only responsible for 15 days after delivery. Check the packing list enclosed
with your griddle to ensure that you have received all the parts to the griddle. If you are missing any parts,
contact the dealer from whom the griddle was purchased.
CAUTION
To prevent equipment damage, don’t tilt the griddle onto any two of its casters, or
pull the unit by the flue vents.
Locate your Magikitch’n warranty and fill in the serial number of the appliance and the date received..
You will find the serial number on the plate inside the door. Put your warranty card in a safe place for
future reference. DO NOT return the card to Magikitch’n.
INSTALLATION CLEARANCES
The griddle needs clearance around it for proper operation. Adequate clearances allow for servicing and
proper burner operation. The clearances shown below are for installation in combustible and non-
combustible construction.
Combustible Non Combustible
Construction Construction
Back 8.0 in./20.4 cm 8.0”/20.4 cm
Sides 2.0 in./5.0 cm 0.0 in./0.0 cm
GAS CONNECTION
Your gas appliance will give you peak performance when the gas supply line is of sufficient size to
provide the correct gas flow. The gas line must be installed to meet the local building codes or National
Fuel Gas Code ANSI Z223.1 Latest Edition. In Canada, install the appliance in accordance with
CAN/CGA-B149.1 or .2 and local codes. Gas line sizing requirements can be determined by your local
gas company by referring to the National Fuel Gas Code, Appendix C, Table C-4 (for natural gas) and
Table C-16 (for propane). The gas line needs to be large enough to supply the necessary amount of fuel to
all appliances without losing pressure to any appliance.
WARNING
NEVER supply the appliance with a gas that is not indicated on the data plate.
Using the incorrect gas type will cause improper operation. If you need to convert
the appliance to another type of fuel, contact your dealer.