Miele HG01 - Manual (Page 20)

8. Secure the dishwasher
to the countertop
^ Open the dishwasher door.
If the steam deflector is installed, the
mounting bracket holes must align
with the slots in the steam deflector.
^ Using flat head screws, secure the
dishwasher to the countertop by
screwing through both the mounting
bracket and the steam deflector.
Make certain that the white rubber
seal located at the top, outer edge
of the dishwasher is tight against the
bottom of the countertop.
Do not drill any additional holes
through any part of the wash cabi-
net. If in doubt on how to secure the
dishwasher, please call Miele’s Tech-
nical Service Department.
For Corian®, marble or granite
countertops, secure the dishwasher
to the adjoining cabinets as follows:
A special fixing angle (part
# 03 341 080) must be ordered from
your Miele dealer or the Miele Technical
Service Department.
^ Slide the dishwasher out from under
the countertop about 4" (10 cm).
^ Insert the tab of each fixing angle in
to the guide hole on top of the dish-
washer. Turn the fixing angle right or
left so that it is next to the adjoining
cabinetry.
^ Push the dishwasher back into its o-
pening. Align and fasten it to the ad-
jacent cabinets using 2 screws for
each fixing angle.
Installation
20