Miele HG01 - Manual (Page 9)

1. Install the steam deflector
A stainless steel steam deflector is sup-
plied to protect the countertop from
steam and condesation when the dish-
washer is opened. If the countertop is
made of Corian®, granite, marble or
other solid, waterproof material, the
steam deflector is not required.
The steam deflector has an indicator re-
flector to show when the dishwasher is
running.
The left side of the reflector and the
optic indicator in the the control
panel must line up for the reflector to
work.
If the counter is made of different
materials, the steam deflector
should be positioned so that it cov-
ers the edge where the materials are
joined. Countertops with wood or
laminate edging should be tacked
through the rear holes of the steam
deflector.
^ Squeeze a bead of silicone sealant
from the supplied tube into the ridge
formed by the curved edge,
a, of the
steam deflector.
^ Line up the steam deflector, b, with
the lower front edge of the countertop
and use the supplied tacks to nail in
place.
^ Wipe off any excess silicone with a
rag.
^ Press the optic indicator reflector in
place.
Installation
9