Miro Displays P17F98 - Manual (Page 9)

OSD-M ENU D ESCRIPTIONS
C OLOR S ELECT
This control adjusts the color temperature of the screen image.
9300°K and 6500°K are preset by factory. You can not do adjustment.
9300°K : Which is bluish white light.
6500°K : Which is reddish white light.
U SER : You can adjust the inidvidual color gun intensity by yourself.
Increase or decrease red, green or blue depending upon which
is selected.
OSD A DJUSTMENT
You can choose where you would like OSD image to appear on your screen.
H-P OSITION ( HORIZONTAL POSITION )
Select this control to center the OSD menu horizontally on the screen.
V-P OSITION ( VERTICAL POSITION )
Select this control to center the OSD menu vertically on the screen.
OSD T IMER
You can select how long the monitor waits after the last adjust of
the knob to shut off the OSD menu. The time setting choises are
from 8 to 60 seconds.
R ESET
Resets the display settings to the original factory reset values. Press
and hold down the Enter button until the progress bar disappears.
L ANGUAGE
Select this control to choose from: English, German, Spanish, Italian,
French, Portugal and Chinese.
E XIT
Exits the OSD controls. (Turning off the OSD windows).
D EGAUSS
Eliminates the build-up of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus and convergence.
OSD-M ENU D ESCRIPTIONS
P INCUSHION
Select this control to straighten the sides of the image by pulling them
in opposing directions.
T RAPEZOID
Select this control to even the widths of the top and bottom of the
display (pulling the sides in opposite directions).
P ARALLELOGRAM
Select this control to center the top and bottom of the display (pulling
the sides in the corresponding direction).
P IN . B ALANCE
Select this control to straighten the sides of the image by pulling them
in the corresponding direction.
A DVANCED SELECT
M OIRÉ A DJUSTMENT
The screen image may shake slightly while the moiré cancellation
function is ON. It is normally OFF (H=0, V=0).
V. M OIRÉ
To increase or decrease the vertical moiré of the image.
H. M OIRÉ
To increase or decrease the horizontal moiré of the image.
C ORNER ( OPTIONAL )
Use to adjust the alignment of top and bottom corner.
T OP C ORNER
To increase or decrease the top corner of the image.
B OTTOM C ORNER
To increase or decrease the top corner of the image.
8 9