Motorola Spirit GT - Manual (Page 23)

No Power
Message Not Trans-
mitted
Message Not
Received
Hearing Other Noise
or Conversation on a
Channel
Limited Talk Range
Recharge or replace NiMH battery.
Make sure the Push-To-Talk button is com-
pletely pressed as you transmit, LED should
glow continuously.
Reposition, replace or charge battery.
Confirm radios have the same frequency and
Interference Eliminator Code settings.
Make sure Push-To-Talk is not inadvertently
being pressed.
Reposition, replace or charge battery.
Buildings, obstructions, operating indoors or
in vehicles may interfere with communica-
tion. Change your location.
Make sure volume is turned up.
Confirm Interference Eliminator Code is set,
(active settings are 1-38).
Shared frequency or Interference Eliminator
Code may be in use, change frequency or
code.
Steel/concrete structures, heavy foliage and
use in residential/industrial areas, buildings
and in vehicles will decrease range, check for
clear line of sight to improve transmission.
Wearing radio close to body such as in a
pocket or on a belt will decrease range,
change location of radio.
7URXEOHVKRRWLQJ