Motorola Spirit GT - Manual (Page 7)

Installing the NiMH Battery:
1. Remove battery door. Figures 2-4.
2. Insert NiMH battery so that the contact
sides are down (see note below).
Figure 5.
3. Replace the NiMH battery door by posi-
tioning it halfway up the radio body.
Figure 6.
4. Push battery door up until secure.
Stop Sign: The NiMH battery has a stop
sign symbol to remind you to turn the battery
over and align holes with pegs before
inserting battery into the radio, contact sides
down. Figure 7.
When power is low, recharge the battery
immediately to avoid interrupted use.
5
Figure 5. Figure 5.
Figure 7.
Figure 6.