Memorex MT1091 - Manual (Page 13)

– 12 –
ADDING/DELETING CHANNELS
Manual Programming
a Press the MENU button to bring up the
menu screen.
MENU TUE 1:35PM
CLOCK SET
PROGRAM TIMER
PICTURE ADJUST
CH PROGRAM
LANGUAGE
DEMONSTRATION
EXIT
[+] / [–] : MENU SELECT
[MENU] : ENTER
s Use the + or – button to highlight CH
PROGRAM, then press the MENU but-
ton to select it.
CH PROGRAM
AIR/CABLE CABLE
AUTO SEARCH
CH MEMORY
EXIT
[+] / [–] : SELECT
[MENU] : AIR/CABLE
d Use the + or – button to highlight CH
MEMORY.
CH PROGRAM
AIR/CABLE CABLE
AUTO SEARCH
CH MEMORY
EXIT
[+] / [–] : SELECT
[MENU] : ENTER
f Press the MENU button to select CH
MEMORY.
CH MEMORY
CABLE 10
[+] : ADD
[–] : DELETE
[MENU] : EXIT
g Press the CHANNEL (Up or Down) but-
ton or Number buttons to select the
channel you want to add to or delete
from the TV’s memory.
h Press the + button to add the channel
(it will turn white). Or, press the – button
to delete the channel (it will turn red).
j Follow steps 5 and 6 to add or delete
other channels.
k Press the MENU button to return to the
channel program screen.
l Press the MENU button to exit while
EXIT is highlighted.
NOTES
• If you don't program channels, you will
still receive channels when you press the
CHANNEL (Up) and (Down) buttons or
Number buttons. But you will also have
to scan through channel that have no
reception or very poor reception when
you press the CHANNEL (Up) and
(Down) buttons.
• You may have to reprogram channels if
there is a power outage or if the TV is
unplugged.