Memorex MT1091 - Manual (Page 6)

– 5 –
CHANNEL
VOLUME MUTE
MENU
RECALL
SLEEP TV/VIDEO
POWER
Q.REV.
Remote Control
Number Buttons
Press to select a channel. For
channels 1-9, press 0, then the
channel you want to watch. For
example, for channel 6, press 0,
6. For channels 100-125, press
the 100 button, then press the
last two digits of the channel
you want to watch .For
example, for channel 116, press
100, 1, 6. Note:Make sure you
press the second or third digit
of a channel within a few
seconds of pressing the first
digit. If you don't, you'll have to
start over.
– and + Buttons
Press to adjust or select
functions listed in on-screen
displays.
MENU Button
Press to call up the main menu
screen. Also, press to enter data
when going to the next step of
an operation.
MUTE Button
Press once to eliminate sound.
Press again to hear sound.
POWER Button
Press to turn the TV on or off.
RECALL Button
Press to display the channel
being viewed. Press again to
display the time. Press again
to remove the
on-screen display.
SLEEP Button
Press to start the sleep time or
to display the time left in a
sleep timer. See page 15 for
details.
TV/VIDEO Button
Pressing this button permits
the TV to be used as a
monitor to view program
sources such as a VCR,Video
Disc, ect. press again to
resume normal TV function.
Q.REV. (Quick Review)
Button
Press to return to the previous
channel. For example, if you
were watching channel 2, then
use the Number buttons to
switch to channel 6, pressing
the Q.REV button will return
the TV to channel 2.
CHANNEL (Up/Down)
Buttons
Press to scroll up or down
through the channels.
VOLUME (Up/Down) Buttons
Press to raise or lower the
sound.